Skip to content

Cart

 

Restoring old cast iron

Bring an old family cast iron pan back to life

Cast iron doesn't rust away, it just rests. Real finds hide in kitchen cupboards, at flea markets and at the back of the shed. An old cast iron pan can look hopelessly rusty, but it can almost always be brought back, and be as useful as ever.

Restoring an old pan is giving new life to something someone may once have cooked a Sunday roast in, or fried pancakes in over a wood stove. And it's easier than you think.

Here's how to bring your old pan back:

1. Scrape off the rust
Start by removing all loose rust and old food. Use steel wool or a wire brush, depending on the state of the pan. It can feel harsh, but cast iron can take it.

2. Clean it thoroughly
Once it's brushed down, wash the pan well with hot water and washing-up liquid. Yes, washing-up liquid is fine here, since you're building the seasoning up from scratch. Dry it thoroughly straight away.

3. Oil it
Rub the whole pan, inside and out, with an oil that handles heat, ideally Swedish rapeseed oil. Wipe it off until only a very thin film is left. Too much oil gives a sticky surface.

4. Season it
Put the pan upside down in the oven at around 250 °C (depending on the oil) for about 40 minutes. Put foil underneath to catch any drips. Repeat 2–3 times for the best result. You'll get a natural surface that food releases from, and that only gets better with use.

5. Use it often
The best way to look after cast iron is to use it. Fry, sauté, bake. The more you cook, the better the surface gets.

Read more